Bombas Yunk

Industrial Series

The self-priming pumps in the Industrial Series provide efficient, economical solutions to decanting the widest range of fluids, with a flow-rate from 100 to 20.000 litres/hour.

Description

The body of the pumps comprising the Industrial series are made wholly in 316 stainless steel or in brass, and can be fitted with different types of motor powering.

Thanks to their carefully studied build design, they have just one moving part, no gearing and no metal-to-metal contacts, all of which considerably reduces their wear and tear and guarantees continued service.

They are versatile and perfectly adaptable, because the pump body can turn 360º, enabling the outlets to be positioned in accordance with the installation requirements.

The pump body is eccentric to the turbine, as it has a built-in fixed cam.

The turbine inside the pump body creates cubicles between its blades. When it turns, a change takes place in their volume. When the blades lose contact with the cam, a negative pressure is produced, causing the suction of the fluid towards the inside of the chamber.

The fluid is conveyed towards the output, where the blades regain contact with the cam, causing a pressure increase, which drives the fluid out.

Impellers

Neoprene
general use 70°C
Nitril
for oil and by-products 80°C
Hypalon
for chemical products 110°C
M.D.P.E.
for corrosive products 80°C
Sanitary
for food use 100°C
ST
for food use 130°C

Technical characteristics

Flow-rates
from 100 to 20.000 L/H
Speeds
750, 1.000 y 1.500 r.p.m.
Voltage
C.A. 220 V. II - 220/380 III

Industrial Series Models - Monobloc

MINI Model

CTE r.p.m. C.V. kW l/h bar
230 II 1.500 0,10 0,075 100 2,5

D-2 Model

CTE r.p.m. C.V. kW l/h bar
230 II 1.500 0,16 0,12 250 3
230/400 III 1.500 0,16 0,12 250 3
230/400 III 1.000 0,16 0,12 225 2,5

A-2 Model

CTE r.p.m. C.V. kW l/h bar
230 II 1.500 0,25 0,18 700 3
230/400 III 1.500 0,25 0,18 700 3

B-2 Model

CTE r.p.m. C.V. kW l/h bar
230 II 1.500 0,33 0,25 1.200 3
230/400 III 1.500 0,33 0,25 1.200 3
230/400 III 1.000 0,33 0,25 700 2,5

E-2 Model

CTE r.p.m. C.V. kW l/h bar
230 II 1.500 0,33 0,25 2.300 3
230/400 III 1.500 0,33 0,25 2.300 3
230/400 III 1.000 0,33 0,25 1.500 2,5

F-2 Model

CTE r.p.m. C.V. kW l/h bar
230 II 1.500 0,75 0,55 4.500 3
230/400 III 1.500 0,75 0,55 4.500 3
230/400 III 1.000 0,50 0,37 3.000 2,5
230/400 III 750 0,33 0,25 2.000 1,5

Industrial Series Models - High pressure monobloc

E-3 Model

CTE r.p.m. C.V. kW l/h bar
230/400 III 1.500 1,0 0,75 2.200 5,0

F-3 Model

CTE r.p.m. C.V. kW l/h bar
230/400 III 1.500 1,5 1,12 4.200 5,0

Industrial Series Models - 10.000 and 20.000 l/h

J-10 Model

CTE r.p.m. C.V. kW l/h bar
230 II 1.500 2 1,5 10.000 2,5
230/400 III 1.500 2 1,5 10.000 2,5
230/400 III 1.000 1 0,75 7.500 2
230/400 III 750 0,75 0,55 5.500 1,5

Optional transport wheelbarrow

J-20 Model

CTE r.p.m. C.V. kW l/h bar
230 II 1.500 2 1,5 20.000 2,5
230/400 III 1.500 2 1,5 20.000 2,5
230/400 III 1.000 1,5 1,12 20.000 2
230/400 III 750 1 0,75 20.000 1,5

Industrial Series - Free shaft

A-1 Model - Motor YUNK
A-1-S Model - Free shaft

CTE r.p.m. C.V. kW l/h bar
230 II 1.500 0,33 0,25 700 3
230/400 III 1.500 0,33 0,25 700 3
Free shaft

B-1 Model - Motor YUNK
B-1-S Model - Free shaft

CTE r.p.m. C.V. kW l/h bar
230 II 1.500 0,33 0,25 1.200 3
230/400 III 1.500 0,33 0,25 1.200 3

E Model - Free shaft with base-plate - Free shaft

CTE r.p.m. C.V. kW l/h bar
230/400 III 1.500 0,50 0,37 2.300 3

F Model - Free shaft with base-plate - Free shaft

CTE r.p.m. C.V. kW l/h bar
230/400 III 1.500 0,75 0,55 4.500 3